Courbia site pack: Pentes de la Croix-Rousse, Lyon (France)
============================================================
Student Pack | scale 1:1000 | board 3 mm | generated 2026-11-16
Site centre: 45.77001° N, 4.83202° E | size 500 x 350 m
Model size: 500 x 350 mm, 19 layers, 10 sheet(s) of 600 x 400 mm

WHAT'S INSIDE
-------------
contours.dxf     Contours, buildings, roads and water for CAD (AutoCAD, Rhino, Vectorworks, QGIS).
site.3dm         The same for Rhino 7/8, plus a terrain mesh. Buildings are closed extrusions.
terrain.stl      Watertight terrain block for 3D printing, with a flat base.
laser_sheets/    One DXF and one SVG per board sheet, nested and ready to cut.
site_sheet.pdf   A3 site sheet: location, contour plan, sun path, sources.
README.txt       This file.

UNITS AND COORDINATES
---------------------
contours.dxf and site.3dm are in METRES.
Coordinates are real-world, EPSG:2154, in metres; heights are metres above national datum. Site south-west corner (local origin): E 842115.00, N 6520410.00. To work near 0,0, move everything by (-842115.00, -6520410.00).
Grid north is up. True north is 1.33 degrees west of grid north at this site.
Laser sheets are in MILLIMETRES at model scale 1:1000 (1 m on site = 1 mm).
terrain.stl is in MILLIMETRES at 1:1000, origin at the site's south-west corner,
with a 3 mm base under the lowest point. Scale it in your slicer to fit your printer.

LAYERS (contours.dxf and site.3dm)
----------------------------------
SITE_BOUNDARY, TERRAIN_CONTOURS, TERRAIN_CONTOURS_INDEX (every 5th), BUILDINGS,
BUILDINGS_3D (DXF mesh solids), ROADS, WATER, NOTES, and TERRAIN_MESH (3dm only).
Contour interval is 3 m: exactly one 3 mm board at 1:1000.
Contours are closed outlines (closed along the site edge), each at its true height.
Terrain in this site runs from 170.2 m to 225.6 m.
Building heights: 1 from Overture, 575 measured from LiDAR (median of
surface minus terrain inside the footprint), 3 from floor counts, 11 default (6 m).

LASER SHEETS
------------
Colours follow the most common fab-lab convention:
  RED  (RGB 255,0,0), hairline  = CUT
  BLUE (RGB 0,0,255), hairline  = ENGRAVE / score (vector, low power)
Check your own lab's colour mapping before cutting; some labs use different colours.
In the DXF files the layer BOARD_OUTLINE_DO_NOT_CUT shows the board edge only. Delete or hide it.
Solid stack: every layer is cut in full.
Every piece is engraved with its layer number (0 = base). Where a layer has several
pieces they are numbered 3.1, 3.2 and so on. The engraved outline on each piece is the
registration mark: it shows exactly where the layer above sits (the glue line).
Numbers sit under the layer above where possible, so they are hidden in the finished model.
Building footprints, roads and water edges are engraved on the visible steps
(layers ENGRAVE_BUILDINGS, ENGRAVE_ROADS, ENGRAVE_WATER; turn them off if you prefer plain terrain).
Slivers narrower than 3 mm cannot be cut cleanly, so they are removed and stay part of
the layer below. No kerf compensation is applied. Parts are spaced 3 mm apart.
Assembly: start with layer 0, glue each layer onto the engraved outline, work upwards to layer 18.

ACCURACY
--------
Terrain: about ±10 cm vertical on open hard ground (IGN LiDAR HD specification). Accuracy is lower under trees,
on steep slopes and next to buildings. The terrain was lightly smoothed for clean cutting.
The source terrain had no gaps on this site.
Building footprints and heights are indicative. Open data can be out of date.
Desk study for design and model-making, not a survey. Do not use for setting out, construction, legal boundaries or flood assessment.

DATA SOURCES AND ATTRIBUTION
----------------------------
Terrain and surface heights: IGN LiDAR HD (MNT / MNS), © IGN, Licence Ouverte / Open Licence 2.0 (Etalab).
Buildings, roads and water: Overture Maps Foundation (overturemaps.org), including © OpenStreetMap contributors. Available under the Open Database License (ODbL).
Overture source datasets in this pack: OpenStreetMap, TomTom.

You must keep this attribution with the files and with anything you publish from them.
OpenStreetMap-derived data is under the Open Database License: if you share an adapted
version of that data, share it under the same licence.

Courbia | courbia.com
